GeoStabilizer Pre-Mixed

Suitable projects

For appropriate residential dirt areas, small unpaved areas, soil surface treatment, and dust control where a 10:1 formulation is suitable. Small-scale soil stabilization depends on site conditions. Test a small area before treating a larger surface.

Prepare the surface

1. Remove leaves, weeds, and excessive loose debris.
2. Level the soil where necessary.
3. Avoid muddy, saturated, or waterlogged soil.
4. Prepare a small test section to evaluate absorption and coverage.
5. Shake or mix the container as directed on the product label.

Choose compatible equipment

For small areas, use a compatible handheld pump sprayer, battery-powered sprayer, or backpack sprayer. Larger areas may use an ATV-mounted tank, tow-behind sprayer, or commercial low-pressure equipment. Confirm equipment compatibility with the formulation.

Apply evenly

1. Pour Pre-Mixed directly into a compatible sprayer without adding water.
2. Adjust the nozzle for a consistent spray pattern.
3. Start at one edge and move steadily across the area in overlapping passes.
4. Distribute the product uniformly. Do not dump an entire gallon in one spot.
5. Avoid excessive pooling and runoff.
6. Leave the treated soil undisturbed to dry and cure before use.

Drying and curing

Curing depends on weather, soil moisture, quantity applied, and treatment depth. A specific curing time has not yet been verified. Contact GeoStabilizer for product-specific guidance before allowing traffic, irrigation, or disturbance.

Important application notes

Surface spraying alone may be insufficient for deeper soil stabilization; proper mixing and compaction may be required. Follow the current product label and Safety Data Sheet. No verified per-gallon coverage is supplied in these directions; do not use Concentrate coverage as a Pre-Mixed coverage rate.